Apple released a new software version called watchOS 3.1.1 for the Apple Watch. The update was meant to fix bugs and improve performance.
What Happened?
On a Tuesday, Apple decided to pull the watchOS 3.1.1 update. The reason was that the update caused some Series 2 Apple Watches to stop working. This problem is called “bricking.” A bricked device will not turn on or respond to any commands.
Reports from users and from the site MacRumors said that the issue started after the update was installed. The watches showed a red exclamation mark on the screen. The message told owners to visit Apple’s support site.
Why Did the Update Brick Series 2 Watches?
Apple designed watchOS 3.1.1 to work with many Apple Watch models. However, a part of the code did not match the hardware of the older Series 2 watches. When the code ran, it caused the watch’s operating system to crash.
Because the crash happened early in the start‑up process, the watch could not recover on its own. That is why the screen stayed red and the watch seemed dead.
How It Affects Series 2 Owners
If you own a Series 2 Apple Watch, you may have seen the red warning screen after installing watchOS 3.1.1. If you have not installed the update, your watch is still safe.
For those whose watches are already bricked, the device cannot be reset through normal steps. The watch will not respond to a forced restart, and it will not pair with an iPhone.
Apple’s official software list now shows watchOS 3.1 as the latest version for Series 2. This means that Apple is not offering watchOS 3.1.1 for these watches any longer.
What Should You Do If Your Watch Is Bricked?
Here are simple steps you can follow:
- Do not panic. The watch is not permanently damaged; it just needs help.
- Check the red warning. The screen may show a link or a QR code. Write down any web address you see.
- Visit Apple Support. Go to support.apple.com and look for the article about watchOS 3.1.1 bricking.
- Contact Apple Care. You can call Apple or use the chat option. Explain that your Series 2 watch stopped after the watchOS 3.1.1 update.
- Ask about a replacement. Some users may need a new watch if the device cannot be revived.
Apple may offer a repair or a replacement, especially if the watch is still under warranty.
Apple’s Response and Future Updates
Apple acted quickly by removing watchOS 3.1.1 from the download list. The company also posted a notice that watchOS 3.1 is now the latest version for Series 2.
Apple released watchOS 3.1.1 only a short time before pulling it. The update was meant to sit alongside iOS 10.2, which was also released around the same period.
In the future, Apple will likely test updates more thoroughly on older hardware. This helps avoid similar problems.
How to Decide If You Should Update Your Apple Watch
When a new watchOS version appears, consider these points:
- Check compatibility. Look at Apple’s official list to see if your watch model is supported.
- Read user reports. Sites like MacRumors and forums often share early experiences.
- Back up your data. Pair your watch with your iPhone and make sure the iPhone backup is recent.
- Wait a few days. If the update is brand new, waiting can give Apple time to fix any bugs.
Following these steps can keep your watch safe and working.
FAQ
Did Apple admit that watchOS 3.1.1 caused the bricking?
Apple has not released a detailed statement, but the removal of the update and the change to show watchOS 3.1 as the latest version indicate that the company recognized the problem.
Can I reinstall watchOS 3.1.1 on a Series 2 watch?
No. Apple has pulled the update, and the software is no longer offered for Series 2 devices.
Will my watch work again if I restore it with iTunes?
For a bricked Series 2 watch, a standard iTunes restore does not work because the watch cannot communicate with the iPhone. You need Apple’s help.
Is there a risk for newer Apple Watch models?
So far, the issue has only been reported on Series 2. Newer models have different hardware and have not shown the same problem.
Conclusion
Apple pulled watchOS 3.1.1 after it bricked some Series 2 Apple Watches. The update was meant to fix bugs, but a code mismatch caused the watches to stop working. Users with a bricked watch should contact Apple Support right away. Waiting before installing new updates and checking compatibility can help avoid similar problems in the future.

